Prev: RacerX film of one of the gnasty sections of the Snowshoe GNCC
Next: GG125 impressions - ping Jim (FYI) Hijacked to DR350 Carb Tuning
From: Jim on 26 Aug 2007 09:07 I had a problem with my eiger 400, it was running lean. Old gas I guess so i rebuilt the Keihin CVK32 carb new jets etc. the problem is now it runs rich. If I pull up the choke/thottle slide plate in the intake of the carb, it run good. Any ideas? Jim
From: oldfart on 26 Aug 2007 14:49 Check your needle and seat/float and height to be sure it is correct. OF On Aug 26, 6:07 am, "Jim" <suv...(a)optonline.net> wrote: > I had a problem with my eiger 400, it was running lean. Old gas I guess so > i rebuilt the Keihin CVK32 carb new jets etc. the problem is now it runs > rich. If I pull up the choke/thottle slide plate in the intake of the carb, > it run > good. > > Any ideas? > > Jim
From: Bob on 26 Aug 2007 17:11 "Jim" <suvman(a)optonline.net> wrote in message news:fUeAi.63$lO6.57(a)newsfe12.lga... >I had a problem with my eiger 400, it was running lean. Old gas I guess so > i rebuilt the Keihin CVK32 carb new jets etc. the problem is now it runs > rich. If I pull up the choke/thottle slide plate in the intake of the > carb, it run > good. > > Any ideas? > > Jim > Let the gas sit in it for a couple of years. Bob
From: Jim on 27 Aug 2007 04:13
Thanks, I'll give it a try "oldfart" <alan.westcoast(a)gmail.com> wrote in message news:1188154144.779193.44360(a)r34g2000hsd.googlegroups.com... > Check your needle and seat/float and height to be sure it is correct. > OF > > > > On Aug 26, 6:07 am, "Jim" <suv...(a)optonline.net> wrote: >> I had a problem with my eiger 400, it was running lean. Old gas I guess >> so >> i rebuilt the Keihin CVK32 carb new jets etc. the problem is now it runs >> rich. If I pull up the choke/thottle slide plate in the intake of the >> carb, >> it run >> good. >> >> Any ideas? >> >> Jim > > |