From: steve auvache on 20 Jul 2010 14:34 On Tue, 20 Jul 2010 18:21:22 +0100, Grimly Curmudgeon <grimly4REMOVE(a)REMOVEgmail.com> wrote: >We were somewhere around Barstow, on the edge of the desert, when the >drugs began to take hold. I remember totallydeadmailbox(a)yahoo.co.uk (The >Older Gentleman) saying something like: > >><crn(a)NOSPAM.netunix.com> wrote: >> >>> Made for the job, my pint tin of the stuff is around 50 years old and >>> still half full, a little bit goes a long way. >> >>Sounds like the pint-sized tin of copper grease I bought at least 20 >>years ago, maybe longer.I think it will last longer than I will. > ><glum> >My tin of Never-Seez I purloined from work thirty years ago is coming to >an end. My tube of Copper Grease has a small leak. I shall be looking to replace it, it is older than my children. -- steve auvache
From: Chris Dugan on 21 Jul 2010 18:00 On Tue, 20 Jul 2010 08:14:18 -0500, Mark Olson wrote: > Krusty wrote: >> It's a rip-off, yes? I mean, it does nothing that vaseline doesn't do >> for a fraction of the price. Or am I missing something? > > Silicone dielectric grease has a higher melting point. Vaseline is > petroleum based, rather than silicone based. Use it if you want, a > small tube of admittedly expensive dielectric grease lasts me for years. > You can buy it in a larger size and save a bit. Wot he said, in my case it's a tube of Tamiya Switch lubricant from the beginning of my r/c car racing days so that's got to be over 20 years old now :) Being Tamiya you'll probably still be able to get it as they still make cars/kits with the mechanical speed controllers that need this grease to make the contacts last a reasonable length of time. I use it on connector blocks after they've been cleaned up, it helps keep moisture out of the joint. -- Chris 2003 CB500S
First
|
Prev
|
Pages: 1 2 3 Prev: Californication Next: Santander brand placement issues in Silverstone |