From: Rob Kleinschmidt on 26 Nov 2008 16:41 I've seen conflicting opinions on the appropriate U joint grease for shaftys. Currently I'm using Mobil1 synthetic, which I gather is a lithium based NLGI (?) rating 2 grease. Recently I noticed one rebuilder reccomending moly based. Anybody have any opinions on this ?
From: Mark Olson on 26 Nov 2008 17:18 Rob Kleinschmidt wrote: > I've seen conflicting opinions on the appropriate U joint > grease for shaftys. Currently I'm using Mobil1 synthetic, > which I gather is a lithium based NLGI (?) rating 2 grease. > > Recently I noticed one rebuilder reccomending moly based. > > Anybody have any opinions on this ? My own totally unscientific take on this, is I am starting to favor a high quality grease with some Moly added. I used to believe in the Honda Moly 60% Paste but if it's too dry it doesn't seem to work as well as a grease which tends to flow a little better. http://www.hondapartsworld.com/moly60paste.aspx http://www.lubriplate.com/pdf/pds/3_21%203000%20Series.pdf
From: the fly on 26 Nov 2008 17:45 On Wed, 26 Nov 2008 13:41:47 -0800 (PST), Rob Kleinschmidt <Rkleinsch1216128(a)aol.com> wrote: >I've seen conflicting opinions on the appropriate U joint >grease for shaftys. Currently I'm using Mobil1 synthetic, >which I gather is a lithium based NLGI (?) rating 2 grease. > >Recently I noticed one rebuilder reccomending moly based. > >Anybody have any opinions on this ? Been a long time since I rode and maintained a Beemer, but I'd be inclined to use a moly grease. Its load-bearing capcity is greater than lithium grease. That's why it's specified for use in ball joints, universal joints, etc.
From: Claude Hopper on 26 Nov 2008 16:47 Rob Kleinschmidt wrote: > I've seen conflicting opinions on the appropriate U joint > grease for shaftys. Currently I'm using Mobil1 synthetic, > which I gather is a lithium based NLGI (?) rating 2 grease. > > Recently I noticed one rebuilder reccomending moly based. > > Anybody have any opinions on this ? grease is grease. -- Claude Hopper :) ? ? �
From: ian field on 26 Nov 2008 17:51 "Rob Kleinschmidt" <Rkleinsch1216128(a)aol.com> wrote in message news:19adc0b8-8f39-4d3f-a5ff-6223f611a573(a)r40g2000yqj.googlegroups.com... > I've seen conflicting opinions on the appropriate U joint > grease for shaftys. Currently I'm using Mobil1 synthetic, > which I gather is a lithium based NLGI (?) rating 2 grease. > > Recently I noticed one rebuilder reccomending moly based. > > Anybody have any opinions on this ? Moly is sold as car wheel bearing grease in the UK HTH.
|
Next
|
Last
Pages: 1 2 3 4 5 6 7 Prev: Tappet noise Virago xv750 Next: garden tractor starter snafu |